Carbon Fiber Center Console Wrap Cover for Model 3 / Y
Carbon Fiber Center Console Wrap Cover for Model 3 / Y
A carbon fiber finish for your everyday drive.
Give your Tesla's center console a new surface with model-specific carbon fiber cover panels. Choose the console generation first, then the material and finish that suit your interior.
A distinctive surface
Choose a gloss or matte finish, with a forged-look option available for Gen.2.
Shaped for your console
Two- or three-piece sets follow the lid seams and openings of the selected generation.
Peel-and-stick installation
Fit over the original trim without removing console parts or drilling holes.
Bring carbon fiber into the center of your cabin.
Gen.2 installation shown. Panel shape and openings vary by generation. Other accessories pictured are not included.
See the carbon fiber look in a real cabin.
Watch a creator's 2023 Model Y interior makeover. The video features additional accessories alongside the center console cover.
Watch on YouTube ↗
Choose your carbon fiber option.
Dry Carbon Fiber
Made using dedicated molds and carbon fiber sheet material, with punched features shaped for the console layout.
Real Carbon Fiber
Made from directly press-formed carbon fiber plate without an autoclave. For this product, the plate is more brittle than the Dry Carbon Fiber option and is offered at a lower price.
Two options, both carbon fiber
These are the material option names used for this product. Choose the corresponding finish and console generation in the purchase options.
Designed around the console layout
Thin, rigid cover panels fit over the original console trim. Separate pieces follow the lid seams and openings of the selected generation.
Dry-fit each piece with the adhesive liner still on. Check the edges, lid movement, cupholder access and intended key-card area before bonding.
Finish availability by generation
Gloss catches more light; matte creates a quieter reflection. Forged uses an irregular, flake-like pattern.
| Material & finish | Gen.1 | Gen.2 | Gen.3 |
|---|---|---|---|
| Dry Carbon Fiber · Matte | Yes | Yes | Yes |
| Dry Carbon Fiber · Glossy | Yes | Yes | Yes |
| Dry Carbon Fiber · Forged | No | Yes | No |
| Real Carbon Fiber · Matte | No | Yes | Yes |
| Real Carbon Fiber · Glossy | No | No | Yes |
Thin, rigid panels sit over the factory trim. The cover adds an edge and adhesive layer; check lid clearance before bonding.
Match the console generation first.
Compatible with left- and right-hand-drive vehicles across regions, within the listed model and console versions.
| Gen.1 | Model 3 2017–2020 Three panels · key-card slot retained |
|---|---|
| Gen.2 | Model 3 2021–October 2023 Model Y 2020–2024 Two panels · key-card slot retained |
| Gen.3 | Model 3 Highland & Model Y Juniper 2024+ product option · three panels · no earlier-generation card-slot opening |
| Not listed | Model YL. Gen.1 does not cover Model Y. |
How do I tell Gen.1, Gen.2 and Gen.3 apart?
Gen.1 uses the earlier three-section console layout. Gen.2 uses the updated two-section sliding-console layout. Both retain the intended key-card opening. Gen.3 matches the refreshed Highland/Juniper three-section layout, without the same opening. Send a clear console photo and your vehicle details to support@tesery.com if you need help choosing.
Prepare. Align. Press into place.
Adhesive installation
- No console disassembly or drilling required.
- Clean and completely dry the original surface.
- Dry-fit every panel before bonding.
- Use the supplied adhesion promoter according to its product directions.
- During the initial adhesive-set period, avoid water, cleaners and lifting the edges.
Included in the box
- Console cover set: 3 panels for Gen.1, 2 for Gen.2, or 3 for Gen.3.
- Cleaning wipe.
- Adhesion promoter.
Before you start
- Match the panels to your selected console version.
- Remove dust, oils, wax and silicone residue.
- Use a warm cabin; apply gentle warmth to adhesive only when necessary, avoiding overheating.
-
01 Clean & dry-fit
Check the seams, openings and perimeter spacing with the liner still on.
-
02 Prepare & bond
Follow the promoter directions, then lower each panel from one edge and apply even pressure.
-
03 Check & let set
Confirm lid movement, cupholder access and key-card function while parked. Leave the bond undisturbed.
A few more things to know.
For fitment and installation help:
support@tesery.com
Can I reposition a panel?
Check alignment before full bonding. Repeated lifting can contaminate or weaken the adhesive. If a panel catches on a lid or covers a functional area during the dry fit, recheck the generation and orientation before installing it.
Will removal leave the original surface unchanged?
Removal results depend on adhesive age, temperature and the original surface condition. Controlled warmth and plastic tools may help, but residue or a change to the original finish is possible. Damage-free removal is not guaranteed.
How should I care for the finish?
Avoid water, cleaners and lifting the edges during the initial adhesive-set period. Contact TESERY for finish-specific cleaning advice and adhesive-set timing before applying a cleaning product.
Will it work with other console accessories?
Compatibility depends on the accessory's contact points and clearance. Confirm that every lid opens normally and that the cupholders and intended key-card area remain accessible before bonding the panels.
What if it does not fit or arrives damaged?
Contact support@tesery.com promptly with your order details. Returns can be requested within 30 days of receipt, subject to eligibility: unused condition, tags, original packaging and proof of purchase. Get approval before sending an item back. Installed, scratched or adhesive-contaminated panels may not qualify. Return shipping is the customer's responsibility under the policy; contact support about damaged or incorrect items. See the current refund policy for full terms.